Insulation

Garage conversions will often require supplementary insulation as the garage space will be converted into a habitable room, and therefore must comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all three of these areas, but extra insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally accomplished by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same level as the rest of your house. Flat roofs additionally require insulation. This can be done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also essential in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an additional layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be lifted it may be necessary to dig out the floor to add the necessary insulation.