Insulation

Garage conversions will most likely need supplementary insulation as the garage space will be changed into a habitable room, and therefore needs to adhere to building regulations for insulation in this kind of room. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all of the areas, but additional insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat particularly severely. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same standard as the rest of your home. Flat roofs also require insulation. This can be performed utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the home as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it could be necessary to dig out the floor to add the required insulation.