Insulation

Garage conversions will often require supplementary insulation as the garage space will be converted into a habitable room, and consequently has to comply with building regulations for insulation in this kind of space. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofs. To comply with building regulations the garage conversion must meet the U-values in all of these areas, but additional insulation can be installed to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically done by employing internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same level as the rest of the property. Flat roofs additionally require insulation. This is done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the house as an extra layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring does not need to be raised it could be necessary to dig out the floor to add the required insulation.