Insulation

Garage conversions typically necessitate supplementary insulation as the garage space will be converted into a habitable room, and therefore has to comply with building regulations for insulation in this type of space. These regulations designate a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but supplementary insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is normally accomplished by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat especially poorly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same level as the rest of your house. Flat roofs additionally require insulation. This can be achieved by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the house as an additional layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring does not need to be elevated it could be necessary to dig out the floor to add the necessary insulation.