Insulation

Garage conversions usually need additional insulation as the garage space will be converted into a habitable room, and consequently must comply with building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically done by employing internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat especially severely. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same level as the rest of your house. Flat roofs also require insulation. This is done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as another layer of insulation can be easily added to either a raised concrete floor, timber joists or a floating floor. If flooring does not need to be raised it could be necessary to dig out the floor to add the necessary insulation.