Insulation

Garage conversions often need supplementary insulation as the garage space will be altered to a habitable room, and therefore must adhere to building regulations for insulation in this kind of room. These regulations specify a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofing. To meet building regulations the garage conversion must meet the U-values in all of the areas, but additional insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally done by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat particularly badly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same standard as the rest of your house. Flat roofs also require insulation. This is performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the home as an extra layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be elevated it might be necessary to dig out the floor to add the required insulation.