Insulation

Garage conversions will often necessitate additional insulation as the garage space will be changed into a habitable room, and therefore must comply with building regulations for insulation in this kind of room. These regulations designate a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all of the areas, but additional insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically done by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat especially poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This is achieved using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the home as an extra layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be elevated it could be necessary to dig out the floor to add the required insulation.